Author Topic: About Universal AV  (Read 12312 times)

Offline Alberto Meneses

  • Newbie
  • *
  • Posts: 5
  • Kudos +0/-0
About Universal AV
« on: October 08, 2017, 10:34:08 AM »
Hi i really like your software but to save system resources i want to know if is posible disable realtime scanning in universal av and only use secure a plus as a whitelist program like vodooshield or nvt exe radar. Thanks for your atention. Can you give some screen shots?

Offline hendy

  • SecureAPlus Developer
  • Sr. Member
  • *****
  • Posts: 350
  • Kudos +16/-0
Re: About Universal AV
« Reply #1 on: October 08, 2017, 03:54:07 PM »
Hi,
To do that, you can simply turn off real-time scanning in the scan settings.
For the details, can be found at: https://support.secureaplus.com/how-do-i-setup-my-antivirus-settings/

The Application Whitelisting is always enabled, regardless of the real-time scanning settings.

Offline Alberto Meneses

  • Newbie
  • *
  • Posts: 5
  • Kudos +0/-0
Re: About Universal AV
« Reply #2 on: November 06, 2017, 12:18:42 PM »
I have another cuestion How can Universal AV realtime protection can work alongside traditional av? in my case i use emsisoft how can it work togegher? how can not have error like duplicate read of a file? Emsisoft are monitoring system in realtime how can you work to elude a overlap whith universal av realtime protection enabled?
Is posible a overlap whith universal av realtime protection enabled?

Offline hendy

  • SecureAPlus Developer
  • Sr. Member
  • *****
  • Posts: 350
  • Kudos +16/-0
Re: About Universal AV
« Reply #3 on: November 06, 2017, 01:01:30 PM »
It is possible to run Universal AV real-time protection along with other traditional antivirus, but you are right, double reading will happen if both are trying to scan the same file. On our side, to allow this to happen, we set the file reading permission to be shared, so other antivirus can read the same file at the same time. Usually the same thing is done by other antivirus company, if they are reading the file first, they also will share the file reading permission, so other process can read the same file while the scanning occurs.

Offline Alberto Meneses

  • Newbie
  • *
  • Posts: 5
  • Kudos +0/-0
Re: About Universal AV
« Reply #4 on: November 07, 2017, 03:26:51 AM »
Hi i really apreciate the explain. I want to ask you or sugest you two things about interface.
If i disable Universal AV it say i am in risk. Its a litle agresive, dont you think is better say White list mode" include in set up
Full protection to Offline, cloud realtime and whitelist enabled
Cloud protection= _Universal AV realtime  and whitelit enabled
Whitelist mode=  Universal av no realtime and whitelist enabled.
The mensaje "unprotected or at risk are very agressive"
And another thing
Where i can see that programs i allow or whitelist by myself? they are separated ? I think is important a distinction btween user and software desision in interface
Finally is posible reset the whitelist?

Offline hendy

  • SecureAPlus Developer
  • Sr. Member
  • *****
  • Posts: 350
  • Kudos +16/-0
Re: About Universal AV
« Reply #5 on: November 07, 2017, 09:30:15 AM »
Thank you very much for your suggestion.
Actually now if you disabled both real-time protection and Universal AV, it will not give the message "at risk".

When one of the engine is enabled, either offline AV or Universal AV, it expects that the user also use it for the real-time scanning.

Your suggestion is perfectly make sense. Some users may still want to use Universal AV, but without the real-time scanning. This is fine, as long as there is other Antivirus available to backup. For users without any other third party Antivirus, and only rely on SecureAPlus, we may still have to warn the user. I will discuss this more with our team.

For the detail on how to check whether a file is trusted or not, you may refer to the following links:
https://support.secureaplus.com/how-do-i-view-the-trust-levels-in-applications/
https://support.secureaplus.com/set-trust-levels-for-your-file/
https://support.secureaplus.com/what-are-the-trust-levels-in-application-whitelisting/

Reset whitelist can be achieved by uninstall and reinstalling SecureAPlus.

Offline Alberto Meneses

  • Newbie
  • *
  • Posts: 5
  • Kudos +0/-0
Re: About Universal AV
« Reply #6 on: November 10, 2017, 01:57:46 AM »
I hope you add this feature. I have to report you i use ccleaner and kerishdoctor (default options) and always i open secure a plus i see i am not logged in.

Offline hendy

  • SecureAPlus Developer
  • Sr. Member
  • *****
  • Posts: 350
  • Kudos +16/-0
Re: About Universal AV
« Reply #7 on: November 10, 2017, 08:00:07 AM »
What do you mean by not logged in? Do you mean it is at the "Info & Licenses" -> "Account"?
That dialog does not save the login session. If you want to remember the login session, please access it via browser.
The url is: https://secureaplus.secureage.com/sapportal/site/login.sa